Contact Supplier

Mr. Vannes
Leave a messagePayment Type: | L/C,T/T,Money Gram,Western Union |
---|---|
Incoterm: | FOB,CFR,CIF |
Delivery Time: | 7 Days |
Basic Info
Model No.: LDG
Accuracy: 0.5%
Diameter: DN6-DN2200
Liner: Hard Rubber/PTFE/PFA/Polyurethane
ELECTRODE: 316L/HC/Ti/Ta/Platinum
Output: Pluse/4-20mA/RS485/HART
Powered: 12-24VDC /100-230VAC/ Battery
Display: LCD 6 Digital
Protection Grade: IP65 Or IP68
Ambient Temp: -20-+60°C
Language: English; Chinese(Other's On Request)
Additional Info
Packaging: Cartons Or Wooden Case
Productivity: 10000
Brand: PioneerInstrument
Transportation: Ocean,Air, UPS
Place of Origin: China
Supply Ability: 1000
Certificate: CE
HS Code: 9026100000
Port: Dalian,Shenzhen,Tianjin
Product Description
LDG electromagnetic flow meters are intended for fluid measurement in most industries including water, wastewater, food and beverage, pharmaceutical and chemical.
There are two basic components of Electromagnetic Flow Meter:
1.The Detector, which includes the flow tube, isolating liner and measuring electrodes, and
2.The Converter which is the electronic device responsible for signal processing ,flow calculation, display and output signals.
The materials of construction of the wetted parts (liner and electrodes) should be appropriate for the specifications on the intended type of service. Review of the compatibilities consistent with the specifications is recommended.
All electromagnetic flow meters are factory tested and calibrated. A calibration certificate is included in the shipment of each meter.
-Waster water industry: transport networks sewage treatment plants, sludges;
-Chemical industry: acids alkalis, dosing applications, abrasive or corrosive mediums;-Pulp & paper industry: pulp, pastes, sludges & other caustic mediums, liquor, additives, bleaches, colourants ;
-Food & beverage industry: mixing, dosing and filling of drinks under hygienic conditions filling systems applications.
Operating Principle
Electromagnetic Flow Meter Following Faraday`s law of magnetic induction, a voltage is induced in a conductor moving through a magnetic field. In the electromagnetic measuring principle, the following medium is the moving conductor. The voltage induced is proportional to the flow velocity and is supplied to the amplifier by means of two measuring electrodes. The flow volume is calculated by means of the pipe cross section area.
Technical Data
Certification | ISO9001:2008;CE |
Diameter | PTFE: DN6-DN600 |
Hard rubber: DN50-DN2200 | |
Flow Direction | Positive; Negative |
Repeatability Error | ±0.1% |
Accuracy | ±0.5% of rate & ±1.0% of rate |
Medium Temperature | Hard rubber liner:-20-+60°C |
High-temp rubber liner: -20-+90°C | |
PTFE liner: -20-+120 °C | |
High-temp PTFE liner: -20-+160°C | |
PFA: -20...+180°C liner: -20-+160°C | |
Nominal Working Pressure | DN10~DN25≤4.0MPa |
DN32~DN150≤1.6MPa | |
DN200~DN600≤1.0MPa | |
DN700~DN22000≤0.6MPa | |
Velocity | 0.3-10m/s |
Ambient Temperature | -20-+60°C |
Relative Humidity | 5%~95% |
Comsumed Power | <20W |
Product Categories : Electromagnetic Flow Meter > Standard Type Electromagnetic Flow Meter
Hot Products